Die Cutting EMI Shielding Conductive Foam Gasket For PC, Laptop GPS.
Conductive fabric foam tape is single sided electrically conductive self adhesive foam tape. It consist of a perforated foam with electrically conductive coating and an electrically conductive adhesive.
sides are conductive, wrap with conductive cloth, core black foam
doesn't conduct, just stuff. One side is coating with conductive glue
impedance<= 0.08ohm, with excellent protection performance same with
metal. The core material using PU foam, can reduce surface pressure,
with excellent resilience. The gasket with smooth and soft conductive
fiber, so can be adapted to a surface. This gasket is difficult to be
fired, you can use it safely.
Widely using for EMI Shielding of OA machine, laptop, pc or computer peripherals.
Electrical industry EMI shielding.
DIY for phone, tablet, pad, latptop
Bond strength is dependent upon the amount of
adhesive-to-surface contact developed. Firm application pressure and
moderate heat, from 100°F (38°C) to 130°F (54°C), will assist the
adhesive in developing intimate contact with the bonding surface.
To obtain optimum adhesion, the bonding surfaces must be clean,
dry and well unified. Some typical surface cleaning solvents are
isopropyl alcohol or heptane.
Ideal tape application temperature range is 70°F to 100°F (21°C
to 38°C). Initial tape application to surfaces at temperatures below
50°F (10°C) is not recommended because the adhesive becomes too firm to
adhere readily. However, once properly applied, low temperature holding
is generally satisfactory.
If the die cutting emi shielding conductive foam gasket for pc, laptop gps. caters to your requirement, please be free to buy the quality products made in China with our professional manufacturers and suppliers in China. We're equipped with a productive factory at your service.
Hot Tags: die cutting emi shielding conductive foam gasket for pc, laptop gps., China, manufacturers, suppliers, factory, made in China