Shockproof Sponge PORON Foam Tape Sheet

Descriptions: PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water...

Description

Shockproof Sponge PORON Foam Tape Sheet

Descriptions:
PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns.

PORON cellular urethane foam was engineered to have excellent memory (compression set resistance). The compression set resistance of PORON makes it a top pick for sealing and cushioning electronics. 

PORON urethane foam is manufactured by continuously casting and curing mechanically mixed formulas to the desired thickness.

PORON foam tape is using PORON foam as backing material and coated with one side or two sided different kinds of adhesives.


Features:
• Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.
• Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.
• Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications.
• Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface.
• Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies.
• Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side.


Applications:
• Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications.
• For Sealing, Gasketing, and Cushioning.


OEM Size: Special length, thickness or combinations can be supplied per customer's request. Products can be supplied in roll, tape, sheets or shapes per customer's request. Only you provide the CAD drawing, we can die cut any size for you.


Shelf Life: To obtain best performance, use this product within 12 months from date of delivery and store under normal conditions of 60 ºC to 80ºF (16 ºC to 27ºC) and 40 to 60% R.H. in the original carton.


Our Factory Competitive Advantages:
• Well Competitive Prices and High Quality Control
• Prompt Delivery  
• Earth-friendly Products    
• In a Variety of Design 
• Small Order Acceptable 
• OEM Accepted


INOAC and ROGERS Products:

INOAC

ROGERS

Extra Soft Slow Rebound

Soft Slow Rebound

Item

Typical roll size

Thickness

Item

Typical roll size

Thickness

SRS-70P

500mm*100M

0.2mm

 

 

 

SRS-48P

500mm*100M

0.3mm

4790-92-30012-04P

1372mm*182.88M

0.3mm

SRS-40P

500mm*100M

0.4mm

 

 

 

SRS-40P

500mm*100M

0.5mm

4790-92-25021-04P

1372mm*144.78M

0.53mm

SRS-40P

500mm*50M

0.6mm

4790-92-25024-04P

1372mm*144.78M

0.61mm

SRS-40P

500mm*50M

0.7mm

4790-92-12030-04P

1372mm*121.92M

0.75mm

SRS-40P

500mm*50M

0.8mm

4790-92-25031-04P

1372mm*121.92M

0.79mm

SRS-40P

500mm*50M

1.0mm

4790-92-25041-04P

1372mm*106.68M

1.04mm

SRS-40P

500mm*50M

1.2mm

4790-92-12049-04P

1372mm*106.68M

1.25mm

SRS-32P

500mm*50M

1.5mm

4790-92-12059-04P

1372mm*91.44M

1.50mm

SRS-32P

500mm*50M

2.0mm

4790-92-20081-04P

1372mm*68.58M

2.06mm

SRS-24P

500mm*50M

2.5mm

4790-92-20093-04P

1372mm*68.60M

2.36mm

SRS-24P

500mm*50M

3.0mm

4790-92-15120-04P

1372mm*50.29M

3.05mm

Very Soft Rebound/ PET Supported

Very Soft Rebound/ PET Supported

MS-32P

500mm*100M

0.5mm

4701-30-25021-04P

1372mm*144.78M

0.53mm

MS-32P

500mm*50M

0.7mm

4701-30-25031-04

1372mm*47.72M

0.79mm

MS-32P

500mm*50M

1.0mm

4701-30-25037-04P

1372mm*121.92M

0.94mm

ML-32

500mm*50M

1.5mm

4701-30-20062-04

1372mm*91.44M

1.57mm

ML-32

500mm*50M

2.0mm

4701-30-20093-04

1372mm*68.58M

2.36mm

ML-32

500mm*50M

3.0mm

4701-30-20125-04

1372mm*50.29M

3.18mm

NANOCELL and UNIFOAM Products:

NANOCELL(Korea S&K)

UNIFOAM

Recovery Soft

Recovery Soft

Item

Typical roll size

Thickness

Item

Typical roll size

Thickness

PSR02

520mm*100M

0.2mm

RSF02065-50P04

520mm*100M

0.2mm

PSR03

520mm*100M

0.3mm

RSF03050-50P04

520mm*100M

0.3mm

PSR04

520mm*100M

0.4mm

RSF04045-50P04

520mm*100M

0.4mm

PSR05

520mm*100M

0.5mm

RSF05045-50P04

520mm*100M

0.5mm

PSR06

520mm*100M

0.6mm

RSF06040-50P04

520mm*100M

0.6mm

PSR07

520mm*100M

0.7mm

RSF07040-50P04

520mm*100M

0.7mm

PSR08

520mm*100M

0.8mm

RSF08040-50P04

520mm*100M

0.8mm

PSR10

520mm*100M

1.0mm

RSF10040-50P04

520mm*100M

1.0mm

PSR12

520mm*50M

1.2mm

RSF12040-50P04

520mm*50M

1.2mm

PSR15

520mm*50M

1.5mm

RSF15038-50P04

520mm*50M

1.5mm

PSR20

520mm*50M

2.0mm

RSF20034-50P04

520mm*50M

2.0mm

PSR25

520mm*50M

2.5mm

RSF25032-50P04

520mm*50M

2.5mm

PSR30

520mm*50M

3.0mm

RSF30032-50P04

520mm*50M

3.0mm

Soft - Supported

Soft - Supported

LMS05

520mm*100M

0.5mm

MSF05032-50P04

520mm*100M

0.5mm

LMS07

520mm*100M

0.7mm

MSF07032-50P04

520mm*100M

0.7mm

LMS10

520mm*100M

1.0mm

MSF10032-50P04

520mm*100M

1.0mm

LMS15

520mm*50M

1.5mm

MSF15032-50P04

520mm*50M

1.5mm

LMS20

520mm*50M

2.0mm

MSF20032-50P04

520mm*50M

2.0mm

LMS30

520mm*50M

3.0mm

MSF30032-50P04

520mm*50M

3.0mm


Friendly Tips:

If you find our tapes interested, please send your detailed requirements to us. Xinst’s team would offer different solutions to you within 12 hours. Free samples are also available.



If the shockproof sponge poron foam tape sheet caters to your requirement, please be free to buy the quality products made in China with our professional manufacturers and suppliers in China. We're equipped with a productive factory at your service.

Related Products

Feedback