Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips
PORON is a fine pitch open cell urethane foam produced by Rogers Corporation.
The uniform, microcellular structure allows PORON to be easily compressed for dust seals and cushions. Water sealing with PORON is possible in applications with proper compression and moderate water exposure. The average cell size of PORON foam is approximately 100 microns.
Poron Foam tape Features:
• Low compression set - PORON cellular urethane has superior resistance to taking a compression set as compared to neoprene sponge or polyethylene foam. Less than 2% at 73°F and less than 10% at 158°F makes PORON an ideal gasketing material for many indoor enclosure applications where dust, light and incidental splash sealing are required.
• Energy absorbing - PORON's ability to absorb mechanical shock vibration combined with its low compression set make it an ideal material for shock isolation of battery compartments and sensitive electronics in hand-held devices.
• Consistent microcellular structure - Fine and consistent open cells make PORON microcellular urethane an ideal dust gasket material, suitable for many cleanroom applications.
• Adhesive backings - PORON readily accepts most of pressure sensitive adhesive offerings. Since PORON does not contain any plasticizers, it does not reduce adhesive shelf-life. The integral skin surface provides a clean, readily bonded surface.
• Thickness options - PORON is available in a wide range of thicknesses. Offers bonded layers to achieve non-standard thicknesses and stacked/bonded assemblies.
• Smooth skin - Most grades of PORON foam are manufactured with a smooth skin on both sides. The supported products have a 1 mil PET film bonded permanently to one side.
Poron Foam tape Applications:
• Provide sealing and cushioning in thin displays, medical devices, electronic enclosures, and automotive and industrial applications.
• For Sealing, Gasketing, and Cushioning.
Some Poron Foam Models:
PSR 0.2/0.3/0.4/0.5/0.7/1.0/1.5/2.0 Korea VHM 0.8/0.5/0.7/1.2/1.5/2.0
Korea LM-07/LM-05/LM-20/LMS-15/LMS-05 SR-S-15P 0.5T/0.7T/1.0T/1.5T
SR-S-32P 0.5T/1.5T/1.0T/1.5T SR-S-40P 0.2/0.3/0.4/0.5/0.7/1.0
H-32 1.5T/SR-S-20P/MX-48EG ML-32 1.5T/2.0T，MS-40S/SS-24P HH-48C 1.5/2.0/3.0/4.0/5.0T
If the Die Cutting Custom Size Poron Foam Gasket Tape Foam Strips caters to your requirement, please be free to buy the quality products made in China with our professional manufacturers and suppliers in China. We're equipped with a productive factory at your service.